Workshop folding machine 2,04 m - equipped with a segmented clamping beam tool - steel 1 mm

Beading accessory with a 14, 16 or 18-mm Ø stick, length 2m (Ø to be specified at the order PVX)

3-position aluminium geared-down beading accessory with 14, 16 or 18mm Ø stick (Ø to specify at the order), reference ABAL2040V, 0.65mm zinc capacity for a 14mm Ø stick and 0.80mm for a 16 and 18mm Ø stick. Gear reduction system to make very regular beads without effort. Used with the PVX folding machines

Stick length 2m, Ø 14mm for ABH2040 and ABAL2040

Extra 14mm Ø stick, reference BAH14-2040, for geared-down beading accessory ABH14-16-2040 and ABAL2040. Used for the folding machines models PCA2040, PCX2040A, PZX2040, PBS2040-15, PVX2040, PVX2040T and PVS2050M

Stick length 2m, Ø 16mm, for ABH2040 and ABAL2040

Extra 16mm Ø stick, reference BAH16-2040, for geared-down beading accessory ABH14-16-2040 and ABAL2040. Used for the folding machines models PCA2040, PCX2040A, PZX2040, PBS2040-15, PVX2040, PVX2040T and PVS2050M

Stick length 2m, Ø 18mm, for ABH2040 and ABAL2040

Extra 18mm Ø stick, reference BAH18-2040, for geared-down beading accessory ABH18-2040 and ABAL2040. Used for the folding machines models PCX2040A, PZX2040, PBS2040-15, PVX2040, PVX2040T and PVS2050M

Narrow apron tool (12 mm)

Extra narrow folding beam tool, length 2040mm, width 12mm, reference PVX-REG12-2040, for folding machines models PVX2040 and PVX2040T. NB: more the tool is narrow, less the machine folding capacity is important (Capacity: -30% compared to the 15mm standard tool)

Wide folding beam tool (20 mm)

Extra folding beam tool, length 2040mm, width 20mm, reference PVX-REG20-2040, for folding machines models PVX2040 and PVX2040T. NB: more the tool is wide, more the machine folding capacity is high (Capacity: +20% compared to the 15mm standard tool)

2 adjustable back gauge arms from 60 to 750 mm

Set of 2 back gauge arms with slide type X, reference PVXB2040, adjustable from 65 to 750mm, for manual folding machines PVX2040. The gauge arms slide on the fixing rail at the back of the machine and are stopped in position. Possible positioning of the metal sheet as per the desired dimension as well as its back support

2 adjustable back gauge arms from 60 to 500 mm, for PVX2040 folding machine

Set of 2 back gauge arms with slide type X, reference PVXB2040-500, adjustable from 65 to 500mm, for manual folding machines PVX2040. The gauge arms slide on the fixing rail at the back of the machine and are stopped in position. Possible positioning of the metal sheet as per the desired dimension as well as its back support

Extra back gauge arm 750 mm

Extra back gauge arm with slide type X, reference PVXBS-C750, adjustable from 60 to 750mm. Adding an extra gauge arm provides a better back holding of the metal sheet on large lengths and improves positioning before cutting or folding

Belt Back Gauge - 750 mm

Back gauge with belt, reference PVXBC2040, from 5 to 750mm for folding machines models PVX2040 and PVX2040T. Gauge with lateral control by wheel and adjustable by digital counter, equipped with 4 repositionable fingers over the length

Extra rotating back gauge finger for PVX-PZX-PVS

Extra rotating gauge finger, reference DOIGT-PVX-BC-ROT for back gauge with belt PVXBC, PZXBC and PVSBC. Adding one or several extra gauge fingers provides a better back holding of the metal sheet and improves its whole positioning against the gauge. Easy relocation of the gauge fingers acc. to the metal sheet format

Back table for folding machine; adjustable sliding back gauge integrated

Back table, reference ETBX2040V for folding machines PVX2040 and PVX2040T, gauge from 60 to 1000mm. Back table equipped with orientable tool over the whole length to abut the metal sheet easily acc. to the desired dimension before cutting or folding