Manual folding machine, 1m - zinc, copper, alu: 1.5mm, steel: 1.2mm, angle gauge

Clamping foot pedal

Clamping-loosening foot pedal, reference PCXP1020, for manual folding machine PCX1020. Anti-slip pedal with double action to optimize the use of the folding machine by keeping the operator's hands free when handling the parts to be folded

Guide rail for roller shear CCMA, for folding machine PCX1020A

Guiding rail, reference RCX1020MA for building site or workshop manual folding machine PCX1020. Hinged device at the front of the folding machine intended to use the CCMA roller shear for the scribe cuts of material before folding

CCMA roller shear - cutting capacity zinc 0.8 mm, aluminium 0.8 mm, steel 0.63 mm

Roller shear, reference CCMA, 0.8mm zinc capacity, 0.7mm steel capacity, to cut the material on manual folding machines. Roller shear to be used on a guiding rail only

Beading accessory with a 14, 16 or 18-mm Ø stick, length 1m (Ø to be specified at the order)

3-position aluminium geared-down beading accessory with 14, 16 or 18mm Ø stick (Ø to specify at the order), reference ABAL1020, 0.80mm zinc capacity for a 14mm Ø stick and 1.0mm for a 16 and 18mm Ø stick. Gear reduction system to make very regular beads without effort. Used with the manual folding machine PCL1020A and PCX1020

Stick length 1m, Ø 14mm, for ABH1020 and ABAL1020

Extra 14mm Ø stick, reference BAH14-1020, for geared-down beading accesory ABH1020 and ABAL1020. Used for folding machines models PCL1020A, PCX1020 and beading machine BAG1020MD

Stick length 1m, Ø 16mm, for ABH1020 and ABAL1020

Extra stick, 16mm diameter, reference BAH16-1020, for geared-down beading accesory ABH16-1020 and ABAL1020. Used for folding machines models PCL1020A and PCX1020

Stick length 1m, Ø 18mm, for ABH1020 and ABAL1020

Extra stick, 18mm diameter, reference BAH18-1020, for geared-down beading accesory ABH18-1020 and ABAL1020. Used for folding machines models PCL1020A and PCX1020

Set of 4 wheels for PCX1020, PCX2040A and PCX2540A

Set of 4 wheels, reference PCXR2040, used on the manual folding machines PCX1020, PCX2040A and PCX2540A. This system makes easy the machine movement on a stable and hard floor without disassemblying it nor using handling equipment. Very useful to arrange the workstation in the workshop easily

Set of 2 sliding back gauge arms, up to 510 mm, for PCX1020 folding machine

Set of 2 back gauge arms with slide type X, reference PCXB1020, adjustable from 40 to 510mm, for manual folding machines PCX1020. The gauge arms slide on the fixing rail at the back of the machine and are stopped in position. Possible positioning of the metal sheet as per the desired dimension as well as its back support

Extra back gauge arm, stroke 510 mm, for PCX1020, PCX2040A and PCX2540A

Extra back gauge arm with slide type X, reference PCXBS2-2.5, adjustable from 40 to 510mm. Adding an extra gauge arm provides a better back holding of the metal sheet on large lengths and improves positioning before cutting or folding

Tool to close seams at 180° with adjustable heigth

Tool to close the seams, reference OFP-180, to make hems at 180° from a seam at 135°, 0.8mm steel capacity

Roller offsetting tool on CCMA guide rail

Roller offsetting tool, reference OSRA, for use on the guide rails of Jouanel Industrie folding machines. For ribbing flat sheet metal, with or without hollow joints, to create underside cladding, cladding profiles, dormer cheeks or to reinforce the rigidity of sheet metal, steel capacity 0.8mm