Manual folding machine 2 m - zinc, copper, aluminum: 1 mm, steel: 0.7 mm, angle gauge

Clamping foot pedal for PCX2040A and PCX2540A

Clamping-loosening foot pedal, reference PCXP2040A, for manual folding machines PCX2040A and PCX2540A. Anti-slip pedal with double action to optimize the use of the folding machine by keeping the operator's hands free when handling the parts to be folded

Guide rail for roller shear CCMA, for folding machine PCX2040A

Guiding rail, reference RCX2040MA for building site or workshop manual folding machine PCX2040A. Hinged device at the front of the folding machine intended to use the CCMA roller shear for the scribe cuts of material before folding

CCMA roller shear - cutting capacity zinc 0.8 mm, aluminium 0.8 mm, steel 0.63 mm

Roller shear, reference CCMA, 0.8mm zinc capacity, 0.7mm steel capacity, to cut the material on manual folding machines. Roller shear to be used on a guiding rail only

Beading accessory with a 14, 16 or 18-mm Ø stick, length 2m (Ø to be specified at the order)

3-position aluminium geared-down beading accessory with 14, 16 or 18mm Ø stick (Ø to specify at the order), reference ABAL2040, 0.65mm zinc capacity for a 14mm Ø stick and 0.80mm for a 16 and 18mm Ø stick. Gear reduction system to make very regular beads without effort. Used with the manual folding machine PCX2040A, PCA2040 and PZX2040

Stick length 2m, Ø 14mm for ABH2040 and ABAL2040

Extra 14mm Ø stick, reference BAH14-2040, for geared-down beading accessory ABH14-16-2040 and ABAL2040. Used for the folding machines models PCA2040, PCX2040A, PZX2040, PBS2040-15, PVX2040, PVX2040T and PVS2050M

Stick length 2m, Ø 16mm, for ABH2040 and ABAL2040

Extra 16mm Ø stick, reference BAH16-2040, for geared-down beading accessory ABH14-16-2040 and ABAL2040. Used for the folding machines models PCA2040, PCX2040A, PZX2040, PBS2040-15, PVX2040, PVX2040T and PVS2050M

Stick length 2m, Ø 18mm, for ABH2040 and ABAL2040

Extra 18mm Ø stick, reference BAH18-2040, for geared-down beading accessory ABH18-2040 and ABAL2040. Used for the folding machines models PCX2040A, PZX2040, PBS2040-15, PVX2040, PVX2040T and PVS2050M

2m Back table with integrated adjustable sliding back gauge, for PCX2040A

Back table, reference ETBX2040C, for folding machine PCX2040A, gauge from 45 to 1000mm. Back table equipped with orientable tool over the whole length to abut the metal sheet easily acc. to the desired dimension before cutting or folding

Sliding set of 2 back gauges with ways from 40 up to 510 mm, for PCX2040A

Set of 2 back gauge arms with slide type X, reference PCXB2040, adjustable from 40 to 510mm, for manual folding machines PCX2040A and PZX2040. The gauge arms slide on the fixing rail at the back of the machine and are stopped in position. Possible positioning of the metal sheet as per the desired dimension as well as its back support

Extra back gauge arm, stroke 510 mm, for PCX1020, PCX2040A and PCX2540A

Extra back gauge arm with slide type X, reference PCXBS2-2.5, adjustable from 40 to 510mm. Adding an extra gauge arm provides a better back holding of the metal sheet on large lengths and improves positioning before cutting or folding

Set of 4 wheels for PCX1020, PCX2040A and PCX2540A

Set of 4 wheels, reference PCXR2040, used on the manual folding machines PCX1020, PCX2040A and PCX2540A. This system makes easy the machine movement on a stable and hard floor without disassemblying it nor using handling equipment. Very useful to arrange the workstation in the workshop easily

Tool to close seams at 180° with adjustable heigth

Tool to close the seams, reference OFP-180, to make hems at 180° from a seam at 135°, 0.8mm steel capacity

Roller offsetting tool on CCMA guide rail

Roller offsetting tool, reference OSRA, for use on the guide rails of Jouanel Industrie folding machines. For ribbing flat sheet metal, with or without hollow joints, to create underside cladding, cladding profiles, dormer cheeks or to reinforce the rigidity of sheet metal, steel capacity 0.8mm